How Much Does It Cost to Build a Deck in Washington? (2026 Guide)
These are not national averages. Every number on this page comes from decks I have built or bid in Southwest Washington in 2026. They are ranges to plan with, not a bid on your deck. Prices are before sales tax (8.2% in Longview) and before permit fees, which are billed at cost.
The short answer
Low deck, no railing: about $25 to $36 a square foot, depending on the boards.
Raised or second-story deck with railing: about $60 to $70 a square foot.
Small or hillside deck: can pass $100 a square foot.
New boards on sound framing: about $17 a square foot in composite.
What decks have actually cost
Low deck, no railing, Longview: 10x18 (180 sq ft), TimberTech composite with a picture-frame border and hidden fasteners. $6,439, about $36 a square foot.
Second-story deck, Longview: 47x8 (376 sq ft), cedar, with tear-out, new footings, posts and beam, cedar guardrail and permit paperwork. $26,300, about $70 a square foot. A deeper 47x11.5 option (540 sq ft) was $32,300, about $60.
Raised deck rebuilt and extended, Kalama: about 434 sq ft, TimberTech with aluminum railing (owner did the tear-out). $29,160, about $67 a square foot.
Small hillside deck, Kalama: 8x14 (112 sq ft), freestanding, composite, 8 ft posts, cable railing. $11,875, about $106 a square foot.
Cedar vs. pressure-treated vs. composite
The framing under all three is the same pressure-treated lumber. From my own supplier receipts this year, the boards cost about $3.50 a square foot of deck in pressure-treated, $5 to $7 in cedar and $14 in composite (TimberTech or Trex), before waste and fasteners.
On a 12x16 deck, going from pressure-treated to composite adds about $2,000 in boards. On a 20x24 deck it is closer to $4,900.
12x16, 16x20 and 20x24 deck examples
Scaled from the real jobs above, in composite, before tax and permit:
12x16 (192 sq ft): about $6,500 to $7,500 as a low deck with no railing; about $11,500 to $13,500 raised with railing, often more.
16x20 (320 sq ft): about $11,000 to $12,000 low; about $19,000 to $22,500 raised with railing.
20x24 (480 sq ft): about $16,500 to $18,000 low; about $29,000 to $33,500 raised with railing.
In pressure-treated, take about $2,000 off the 12x16 and about $4,900 off the 20x24. In cedar, about $1,400 and $3,500.
Stairs and railing
Railing is priced by the foot. Wood railing built on site is the least expensive; cable rail panels alone run about $290 to $380 for a 6 or 8 foot section before posts and labor.
Tearing out an old front ramp and back steps, then building a new 4x8 landing deck and a 5-step stair with rails on both sides, came to $6,200.
Tearing out and replacing an old deck
Taking an old deck down ran 12 to about 30 hours of labor on recent jobs, roughly $800 to $2,000.
New composite boards on sound framing came to about $17 a square foot. Replacing the boards and all the railing in cedar on three decks in Kelso, with three sets of stairs rebuilt, came to $23,360 for about 400 sq ft.
Covered deck pricing
An 18x12 attached cover with a metal roof in Longview was $7,399. A 10x22 exposed rough-sawn fir cover over a second-story deck in Kalama was $18,500. That is about $34 to $84 a square foot, on top of the deck.
What drives labor and material cost
Height off the ground (over 30 inches needs a guardrail, deeper footings and usually stairs), hillside ground, railing, the boards, size and shape, tear-out and rot, and labor at $65 an hour, with me on the job doing the carpentry myself.
Questions people ask
Is this a bid? No. These are ranges from jobs I have built and bid. I give a free written estimate after I look at your deck.
Do I need a permit? A deck more than 30 inches off the ground does. Replacing boards like for like generally does not. I pull the permit; fees are billed at cost.
Why does a small deck cost more per square foot? The footings, posts, railing, stairs and permit do not shrink with the deck.
Financing is available through Acorn Finance with a soft credit check.