Serving Longview, WA

Exposed Aggregate Concrete in Longview, WA

Exposed aggregate concrete for patios, walkways, steps and driveways in Longview. The rock in the mix is washed up to the surface, so it grips in the rain and does not show the dirt and wear a plain gray slab does.

Call (360) 431-9382 or book online for a free estimate.

Longview is flat, rainy and shaded, and that is the case for exposed aggregate. A broom finish wears smooth over the years and a stamped finish can get slick, and on the north side of a house where moss grows, slick is the problem. Exposed aggregate keeps its grip for the life of the slab because the grip is the rock itself.

The finish is done while the concrete is setting. The slab gets poured and leveled, the surface paste gets held back from hardening, and then it is washed off at the right time to bring the rock up. Wash too early and rock comes loose. Wash too late and the paste will not come off. That timing is why I am on site for every pour and every wash.

What goes under it matters as much as the finish on top. Old concrete comes out, roots come out, and the base gets rebuilt and compacted. Rebar or wire goes in, and control joints get cut where the slab wants to crack anyway, so it cracks there and not across the middle of the patio.

It works for the whole yard: a patio across the back of the house, the walk to the front door, steps, and driveways. Glow stones can go into the surface along a walk or steps so they show the way after dark. My office is on 9th Ave in Longview, and I pour and finish this work myself.

Save yourself the wait

Send me the size of the area, a photo of it, and whether it is a patio, a walk, steps or a driveway. I will come back with a written number.

Send photos and get a sketch

Exposed Aggregate Concrete We Have Built

See all concrete photos

Recent work in Longview

Exposed aggregate steps near Castle Rock

Concrete steps formed and poured with an exposed aggregate finish, between the posts of a covered porch.

See the photos

Deck removal and exposed aggregate patio in Longview

Old deck taken out, the ground excavated and graded, and forms and rebar set for an exposed aggregate patio and walkway.

See the photos

Exposed Aggregate Concrete questions in Longview

How much does exposed aggregate concrete cost in Longview, WA?

Concrete work runs roughly $10 to $29 per square foot, and exposed aggregate sits in the upper part of that range because of the extra finishing. Removing old concrete, a thicker slab or a lot of grading moves it up. Send me the size and a photo and I will give you a written number.

Is exposed aggregate slippery when it is wet?

No, that is the main reason people pick it here. The exposed rock gives the surface texture, so it grips better in the rain than a smooth or stamped finish.

Can you put glow stones in exposed aggregate?

Yes. Glow stones go into the surface with the rest of the rock, so they show in the finish and light up after dark along a walk or steps. They go in exposed aggregate only, not broom or stamped finishes.

Does exposed aggregate need to be sealed?

Sealing is a good idea. A sealer helps keep moss and stains out of the surface and brings out the color of the rock. It goes on once the concrete has cured.

Can you replace my old driveway or patio with exposed aggregate?

Yes. The old concrete gets broken out and hauled off, the base gets rebuilt and compacted, and the new slab gets poured and finished. Pouring over a bad base is how you get the same cracks back.

Exposed Aggregate Concrete in Longview and Cowlitz County

James Hurula Construction is a licensed Washington general contractor (JAMESHC764LM) based here in town, serving Longview and Cowlitz County on every kind of job on this page. I also work in Kelso, Castle Rock, Kalama, Woodland, Cathlamet, Vancouver, Battle Ground, Ridgefield. Thirty years of field experience, owner on site.

View completed projects | Read customer reviews | Contact us

Ready to start your Longview project?

Call for a free same-day estimate. No pressure, no obligation. (360) 431-9382.