Vancouver, Washington

Patio Cover Builder in Vancouver, WA

Patio covers built in Vancouver, with most of the work in how they attach. A lot of Vancouver houses went up between the 1920s and the 1940s, and the wall a cover hangs off was never built to carry one.

Call (360) 431-9382 or book online for a free estimate.

An attached cover puts half its weight on the house. On a newer house there is usually a rim board or a beam where the ledger can bolt. On an older Vancouver house, what is behind the siding can be anything: old full-dimension lumber, a wall that has been opened up and patched, or a top plate that sits lower than the windows want the cover to be.

So I look before I decide how it attaches. Sometimes the ledger bolts right on. Sometimes the cover is better off on its own beam and posts set a few inches off the wall, so the house carries none of the load and the old siding never gets cut into. That choice gets made on site, not on a guess.

Height is the other thing older houses decide. Low eaves and low windows mean the cover has to start low and still have enough pitch for water to run off. A clear panel roof or a lower slope roofing that is rated for it can solve that without blocking the light into the house.

Electrical for lights or a fan goes to a licensed electrician while the frame is open. The carpentry is mine, start to finish, and I am on site every day it is being built.

Save yourself the wait

Send me the size you want covered and a photo of the back of the house, close enough that I can see the eave and the siding.

Send photos and get a sketch

Patio Covers We Have Built

See all deck and patio photos

Recent work in Vancouver

Gable patio cover over an extended back patio in Longview

Back patio extended and covered with an open gable cover on posts and a beam, trusses left exposed with a tongue and groove ceiling.

See the photos

Concrete patio, sidewalk and patio cover in Longview

Old concrete torn out and repoured, new sidewalks, and a patio cover built over the new slab.

See the photos

Patio Covers questions in Vancouver

How much does a patio cover cost in Vancouver, WA?

Size, roof material and how it attaches to the house decide it. An older house that needs a freestanding beam along the wall costs a bit more than a simple ledger. Send me the size and a photo of the back of the house for a written number.

Can you attach a patio cover to an old house?

Usually. I check what is behind the siding first. If the wall cannot carry it, the cover gets its own beam and posts along the house so the old wall carries nothing.

My eaves are low. Can I still get a cover?

Usually, yes. The cover starts below the eave and uses a roof that works at a lower pitch. Clear panels help a lot here because they keep the room behind the cover from going dark.

Do I need a permit for a patio cover in Vancouver?

Usually, if it is attached to the house. Inside city limits that goes through the City of Vancouver, and outside it goes through Clark County. I pull it, and the drawing it needs is the one I build from.

Do you build pergolas too?

Yes. A pergola gives shade without a solid roof. It still gets real footings and real connections, because wind loads it the same way.

Patio Covers in Vancouver and Clark County

James Hurula Construction is a licensed Washington general contractor (JAMESHC764LM) based in Longview, serving Vancouver and Clark County on every kind of job on this page. I also work in Longview, Kelso, Castle Rock, Kalama, Woodland, Cathlamet, Battle Ground, Ridgefield. Thirty years of field experience, owner on site.

View completed projects | Read customer reviews | Contact us

Ready to start your Vancouver project?

Call for a free same-day estimate. No pressure, no obligation. (360) 431-9382.